Quick answers to common questions.
How many openings can you do with TheCanKey opener?
TheCanKey FOD-free can opener is tested to last for 500 openings. However, it depends on how you use the tool. Watch the guidance video: https://www.youtube.com/shorts/9GzPdR_jOuA
Do I need to make 2 holes in the oil can, one for purring and one for air?
Most of the time it is sufficient to make only one hole. The opening hole is large enough to draw air at the same time. Many engine fillers tend to back flow if the oil is purred too fast. Use of TheCanKey FunnelCap will eliminate oil spilling, see guidance video: https://www.youtube.com/watch?v=-GkmpaqhMc4
Do I have to clean TheCanKey from oil residue?
Yes, it is important to remove oil residue from TheCanKey before use. It will prevent the lower jaw slipping on the edge of the oil can.
Why does TheCanKey slip on the edge of the oil can?
- The jaw itself has been worn.
- The pointy tip is not sharp enough to penetrate the oil can lid.
- Not enough force is used to keep TheCanKey seated on the edge of the oil can.
- Not enough force is used to penetrate the oil can lid.
What do I do when TheCanKey keeps slipping and will not open the oil can?
Replace your TheCanKey with a new and discard the old. See explanation video: https://www.youtube.com/shorts/yRq7xw6H8lw
Are all oil cans made of the same material?
European oil cans are made of slightly thicker material than the US oil cans and thus take a bit more force to open and wear out TheCanKey faster.
What material is TheCanKey made of?
TheCanKey is manufactured from fiber reinforced composite polymer material: material-quality
What is the strength of TheCanKey?
TheCanKey material has the same strength as aluminum.
Has TheCanKey opener been tested?
TheCanKey is manufactured from composite polymer material and is the only certified FOD free turbine oil can opener on the market. It is tested and certified by Saybolt Laboratories not to leave any debris in the oil can during the opening process. Both the new and used TheCanKey can openers have been tested by Saybolt. See the results: material-quality
TheCanKey opener was the only product and opening method tested by Saybolt. It was critical for us to test our product in the development phase, thus no alternative methods have been tested. The feedback from Saybolt has provided the stamp of approval and confidence that we were launching the right product. Since then DIY test with metal screwdriver has been done. Though not vertified by independent authority the findings have been very concerning, read more: the-shocking-inside-of-a-turbine-oil-can-opening
Why is TheCanKey opener only available in black?
TheCanKey can opener is manufactured from composite polymer material. Color black secured the best material quality, both in terms of strength and in terms of color consistency. Keeping the strict discipline around your tools i.e. marking them as well as placing them back in your toolbox after each job, is critical to prevent FOD with tools, no matter the tool. The tool color is in the end irrelevant if one lacks the tool keeping discipline. We recommend that TheCanKey has permanent and dedicated place in the aircraft engineer toolbox to keep track of it, as well as use it for oil can opening, the-toolbox-aircraft-engineers-pride-and-joy
Is TheCanKey approved for usage by military?
TheCanKey FOD free turbine oil can opener is already used by many military divisions and Air Forces around the world. This has created the need for a NATO Stock number (NSN) for easy tool identification. NSN 7240-22-619-5935, P/N TSCANKEY U/TRYK, NCAGE Code R6387.
Do the FunnelCaps fit all cans?
At this stage FunnelCaps are available in three sizes: for the bottles, for gallon cans, and quart cans. Those sizes cover the majority of the oil products on the global market. Check the FunnelCaps: funnel-cap
How to order personalized TheCanKey openers and FunnelCaps?
Putting your company logo on TheCanKey products is a good way to communicate your approach to FOD prevention. You signal your mindset and discipline to your customers and employees. The logo can be put on TheCanKey openers: TheCanKey opener and DustCaps: DustCaps
The process is easy:
- Select the number of products and colors you need and place order on the product page: thecankey shop or by sending email to tj@thecankey.com
- Upload your business logo in open PDF or similar vectorized graphics file or send to tj@thecankey.com. Please specify the logo color by stating Pantone color reference
- E-proof will be provided to you for approval, before printing starts. Please check the following: logo version, orientation and placement, size, color. Once e-proof is approved changes will not be possible
- Print starts and ready products are soon on the way to you. The printing is done manually to secure the highest level of precision and quality. Each item is checked before it is carefully packed
What logo formats are accepted?
Open pdf or similar vectorized graphics files. We can work with most of the files and if any questions or needs occur we will be in contact.
How many colors can be printed?
Today we can print up to 3-colors combination logo. If you want to discuss specific needs for your print, please contact us on tj@thecankey.com
What is the standard delivery time?
Non-printed products can normally ship the next day after the order is placed. Printed products have normally 2-3 weeks delivery time from order. Initial E-proof will be made within 1-2 days, following adjustments.
Where and how do you ship?
We have worldwide delivery, with DHL and FedEx services. We can book shipments also with your company customer number. You will receive confirmation and tracking number from us when products are on the way.
Is there a minimal order size?
The minimum order for non-printed products is 80 USD.
The minimum order for logo printed TheCanKey oil can opener is 100 each, and 150 each for printed DustCaps.
Who covers the shipment costs?
The buyer covers the shipment costs. We apply the flat rate shipment cost to the order, which you see in the order process.
Are duties & taxes included?
The pricing does not reflect potential local import duties and taxes. The buyer covers duties and taxes costs.
What are the accepted payment methods?
Before we produce and ship the order, the invoice will be sent to you for payment unless you order online, in which case you go to the payment method automatically. Before the shipment we need to have received the payment from yourself, unless you have agreed credit terms with us. Payment is quick and simple as we accept variety of payment methods – all major credit cards, bank transfers.
Can I buy TheCanKey products from other partners?
We work with carefully selected retail partners: Boeing Distribution, SkyGeek, Aircraft Spruce, Pooley´s Flight Equipment, Snap On, Puerto Rico Aircraft Suppliers & SJU Pilot Stores, Stahlville Tools. See the list: Retailers
If you want to become our retail partner, please contact us: tj@thecankey.com
Contact Us
We are here to provide you with expert guidance and support tailored to your specific needs. Whether you have questions about our products, need help with an order, or want to discuss a potential project, we’re committed to delivering prompt and reliable assistance.